Squat Bar


Squat Bar

Squat Bar, OB32PRO, has knurling in its center to help grab the back of your shirt and keep it from sliding off the user’s shoulders. That’s why bars without the central knurling aren’t the best to use in squatting. Squat bars are typically thicker in diameter and have a little whip.


Squat Bar


  • Bar Type Man’s bar
  • Bar use Squat Bar
  • Bar Weight 25kg
  • Shaft Diameter 32mm
  • Knurl Marks: 1.5mm
  • Knurl: Sharp
  • Knurl Type IPF-3
  • Full aggressive knurling across the bar
  • Whip Stiff
  • Bar Length 2400mm
  • Loadable Sleeve Length 425mm
  • Shaft Coating Black Phosphate
  • Sleeve Coating Hard Chrome
  • Bushing/Bearing 4 Bronze Bushings
  • Tensile Strength 205,000 PSI
  • Max load 1800lbs/816kg

Quality Judgement Tips:

  • Check whether the basic parameters of the bar and the material used match the actual bar.
  • Check whether the finish treatment is of high quality and provides an attractive finish.
  • Sleeve fixation: Look for either snap ring or end cap systems to connect the barbell sleeve to the shaft. Avoid bars that use hex bolts, which are unreliable.
  • Rotate the sleeve and check whether the rotation is concentric. Rotate it by hand and observe the number of rotational turns; the more turns,  the more sophisticated the processing technology, and the more advanced the combination of shaft and sleeve.
  • Weight: The smaller the tolerance between the actual weight and the standard weight, the better. The weight tolerance of each part should be within the following range:


Barbell Manufacturing Process:



Learn more buying tips: Best Gym Owner’s Barbell Buying Guide

Squat Bar 5